Effect Submerged Arc Welding (SAW) of Angular Distortion of T-joint
DOI:
https://doi.org/10.58905/athena.v2i3.314Keywords:
Anova Analysis, Angular Distortion, SAWAbstract
Submerged Arc Welding(SAW),the molten weld metal is immersed in aflux that protects it from air contamination, forming welding slag which is strong enough to protect the weld metal until it solidifies. The used electrode was AWSA5.17EL12. The base metal being welded is ASTM A283 Grade A. In this study, the effect of angle distortion on the T joint was observed by changing the welding parameters. In order to obtain the optimal results, an attempt was made to link the welding parameters to the angle distortion through a mathematical model by using the Box Behnken statistic technique, the feasibility of which was then tested by using ANOVA analysis. What was obtained was analyzed with the help of the response surface methodology (RSM = Response Surface Methodology) then
References
Garcia, L.M.; Noronha, V.T.; Ribeiro, dan J. Effect of Welding Orientation in Angular Distortion in Multipass GMAW. (2021), JournalManufactur and Material Processing, 5, 63. https://doi.org/ 10.3390/jmmp5020063.
Suwanda, Totok, (2001).MinimalisasiDistorsi Pada PengelasanPelat Baja LunakDenganSubmerged Arc Welding Pada LebarPelat Dan KedalamanPenetrasi yang berbeda, ProsedingSeminarNasionalPascasarjana, PPs, ITS, Surabaya.
Rusdianto, Jaka, (1999), AnalisaPengaruhParameterPengelasan GMAW TerhadapDistorsi yang Terjadi Pada Pengelsan Baja SS400 Ketebalan 12 [mm], Tugas Akhir yang tidakdipublikasikan, ITS, Surabaya.
Malhi A. S., Singh, H., Saurabh, Y., dan Khanna, P., (2020). Estimation of Angular Distortion of FCAW welded SS 202 plates by Mathematical Modeling, International Research Journal of Engineering and Technology (IRJET), Volume: 07 Issue: 08, halaman 2997 - 3004
Samal, T., Khanna, P., (2020), Prediction of Angular Distortion in MIG Welding of SS 202 using Taguchi Technique, International Research Journal of Engineering and Technology (IRJET), Volume: 07 Issue: 05, 2halaman636 – 2641
Wiryosumarto, Harsono, Prof., Dr., Ir., dan ToshieOkumura, Prof., Dr., (2004), TeknologiPengelasanLogam, Jakarta, PT. PradnyaParamita.
Yoshiki, M. Yasushi, M, Masahito, M.,dan Masao, T., (2006), Measurement and Numerical Simulation of Angular Distortion of Fillet Welded T-joints, Proceedings of the Japan Welding SocietyVol.24, No.4(20061105)halaman. 312-323.
Montgomery, D.C., (1991), Design and Analysis of Experiment, John Wiley and Sons, Canada.
Myer, R.H., dan Montgomery, D.C., 2002. Response Surface Methodology, Process and Production Optimazation Using Design Experiment. John Wiley and Sons, Canada.
Downloads
Published
How to Cite
Issue
Section
License
Copyright (c) 2024 Yusuf Pradesar, Pranowo Sidi
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
